Operation Manual

Programming
5/619/2400 (13)
42
■
■■
■
Programming the basic program
In order to set the different flags, you have to perform the steps described below.
Key switch in position P
5 Run the basic program
The left part of the display shows -01- for flag 01
e. g. 12 Enter the corresponding numbers
/ Store the setting and change to the next flag. The left part of the
display shows -02- for flag 02.
Set further flags in the same way
+ Exit the programming mode
■
■■
■
Resetting a single flag
You can select each flag directly, for example flag 06 for setting the date.
Key switch in position P
06 Enter the flag number for date setting
5 Enter the basic program in flag 06 (Date)
e. g.
120696
Enter the date
/ Store the setting
+ Exit the programming mode