Operation Manual

Error messages
5/619/2400 (13)
56
Error messages
Error message for display
In case of incorrect entries, the display shows an error message and, at the same
time, a beep sounds.
< Cancel the error message
Error message Cause
E00 Incorrect key
E01 Incorrect order of keys
E02 Manually entered item number is incorrect or the limit
number of digits entered is exceeded
E03 Total sum exceeds the number of digits possible or the
total sum is zero
E04 Access to or operation of departments/items is denied or
the maximum number of digits has been exceeded
E05 Total sum is negative
E06 Clerk code is incorrect or clerk is not registered
E10 Printer memory capacity full
LOG- - - - Clerk number is to be entered with four digits
Error message for printer
In case the operation of the printer is disturbed for any reason, the display shows
the error message Prn - J. Turn off the cash register immediately and disconnect it.
Check whether the paper rolls and the inking wheel have been inserted correctly,
paper or inking wheel are damaged or whether there are any objects in the printer
mechanism.
Remove them if necessary.
Caution!
Be careful while removing objects from the printer. Do not use knives,
screwdrivers or similar instruments.
Never use force! The printer can be damaged!
Turn on the cash register again and press <.
Perform a new registration.
If the display shows Prn - J again, inform the after-sales service.
If necessary, you can operate the cash register without the printer (see Basic
Program, Flag 19).