Operation Manual

Page 6 Operating Instructions Olympia CM 1856 F
PASSWORD
*
X X
_ _ _ _ _ _ _ _ _ _
When all the characters in the PASSWORD have been entered, the clerk is logged on. If the cash register displays "0",
the
PASSWORD is incorrect and the password can be entered again after pressing the CLR key.
CM 1856F Operator system BAKERY- Firmware
Floting clerk function
In front of the petition of a transaction the operator applies over an operator button (or key).
This system can in the PRG -- mode be influenced i.e., it can be turned off.
Several operators can be registered at the same time.
The operator: 1 applies and starts with his bookings.
The operator can interrupt his booking any time, without which the register is closed.
The operator: 2 can apply over the operator button (or key) now, execute his bookings and lock [CASH] or also interrupt
his booking.
The operator:1 applies on, again over the operator button (or key) his balance is shown automatically and he can
continue his booking.
Attention
As long as an operator is registered the lock position of „R“ cannot be changed . Cancel operators first push the
button through [TRACK = SALDO] . (lay out button)
1.7 Manager system
The system enables the assignment of two manager PASSWORDS. This results in access being restricted for:
1. The functions with the key in position "Z“ (reports with subsequent deletion)
2. The functions with the key in position "S/PRG" (programming)
A password is composed of four characters and the log in process is analogue to that described above. In addition, PRG
Mode can be used to restrict the following clerk rights:
• Restriction of transactions in X mode
• Restriction of transactions in Z mode
• Restriction of "P/O" transactions
• Restriction of "RETURN" transactions
• Restriction of "VOID" transactions
• Restriction of "NO SALE" transactions