Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 18 Specifications subject to change without notice!
5.3 Changing the language
The texts in the display and on the receipt can be made in four different languages:
English, German (default setting), French and Dutch.
Attention: To activate a new language, you must delete all the memories! Observe your obligations in respect of
providing proof and preserving records for the revenue authorities with regard to programming and cash
register reports (refer to Page 61)! Therefore, only change the cash register language before actually putting
it into operation!
Note: Proceed as follows to set to a language other than German:
Example: You want to set English.
Input Display
=P REGISTER 1- 1=
● Set the key to PRG
● Select programme number 13
(refer to Chapter 5.1.2)
● Confirm by pressing CASH.
3
[ 1] STATUS
● Enter the system option
number 1 1
(refer to Chapter 5.13).
#
=P REGISTER 11- 1=
● Use the  and  keys to
move to the input area
[ ] STATUS.
#
● Enter the status number of the
required language via the
numeric keys:
0 for English
1 for German
2 for French or
3 for Dutch.
● Confirm by pressing CASH.
3
#
● Conclude programming by
pressing the SUB-TOTAL key.
2#
In order for the change of language to take effect, you must now clear the memory:
MEMORY CLEAR 1=
● Select programme number 80
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
#
● Use the  and  keys to
select ALL AREA.
● Confirm by pressing CASH.
3
#
● Execute deletion by pressing
CASH
● or cancel the process by
pressing SUB-TOTAL.
3#
PROGRAM AREA
CASHIERS AREA
DEPARTMENT AREA
PLU AREA
E-JOURNAL AREA
ALL REPORT AREA
ALL AREA