Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 22 Specifications subject to change without notice!
5.5 Programming the PLU (price look up)
A maximum of 1250 PLUs can be programmed.
5.5.1 Programmable contents
The following points must or can be programmed or defined for each PLU:
PLU Number
There are 1250 memory locations available.
EAN bar codes with up to 13 digits can be read via a bar code scanner.
PLU caption
You can programme individual PLU names (max. 18 characters). This programming step is optional. On leaving the
factory, general, standard names are pre-programmed.
PLU fixed price
The entry of a PLU fixed price is optional. If you do not enter a fixed price (fixed price is 0.00), the cash register only
operates using free pricing.
Always enter the fixed price with the set number of decimal places and decimal point.
Link department
The department assignment is required in order to assign the PLU to a VAT rate.
PLU status
Use the PLU status to define whether it is a positive or negative PLU.
PLU type PLU status number
Positive PLU 0
Negative PLU 1
Inventory
The system option 9 must be set to Status 1 (active) in order that the inventory is printed in the report (refer to
Chapter 5.13).