Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 23 Specifications subject to change without notice!
5.5.2 Programming PLUs
● Set the key to PRG
● Select programme number 03 (refer to Chapter 5.1.2).
Confirm by pressing the CASH key.
The first PLU programmed is always displayed.
Select PLU:
● Use the  and  keys to move to the input area for the PLU number.
● Use the digit keys to define which PLUs to be programmed.
● Confirm by pressing the CASH key
The cash register automatically switches to the next programming step.
Note: If a PLU number which you want to programme already exists, the “Data Exist !!” message
appears in the display. Despite this, the cash register switches to the memory location so that
you can complete changes, if required.
Programme PLU name:
● Use the  and  keys to move to the input area for the PLU name.
● Enter the required text (max. 18 characters) (refer to Chapter 5.2).
Save each individual letter by pressing the CASH key!
● Confirm by pressing the CASH key.
Programme PLU fixed price:
● Use the  and  keys to move to the input area for the PLU fixed price.
● Enter the fixed price (including decimal point and decimal places).
● Confirm by pressing the CASH key.
Assign department:
● Use the  and  keys to move to the input area for the assigning the department.
● Enter the department number.
● Confirm by pressing the CASH key.
The cash register automatically switches to the next programming step.
Define PLU status:
● Enter the status number.
● Confirm by pressing the CASH key.
The cash register automatically switches to the next programming step.
Note: If the correct PLU status already appears in the display, nothing more needs to be
programmed.
Enter inventory:
● Enter the number of the specific PLU in stock.
● Confirm by pressing the CASH key.
Save the programme for the individual PLU:
● Use the  and  keys to select SAVE…
● Confirm by pressing the CASH key.
The display indicates that the programme data is being saved.
Conclude PLU programming:
● Exit from PLU programming by pressing the SUB-TOTAL key.