Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 28 Specifications subject to change without notice!
5.6.2 Activating/Deactivating the clerk system
The clerk system is activated/deactivated via system option 8 (refer to Chapter 5.13).
Input Display
=P REGISTER 1- 1=
● Set the key to PRG
● Select programme number 13
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
[ 2] STATUS
● Use the digit keys to enter 8.
#
=P REGISTER 8- 1=
● Use the  and  keys to
access the input area.
#
[ 0] STATUS
● Enter the status number 1 in
order to activate the clerk
system.
Or:
● Enter the status number 0 in
order to deactivate the clerk
system.
$#
[ 1] STATUS
or
[ 0] STATUS
● Confirm by pressing CASH.
3#
Save…!!
Please Continue…
● Conclude programming by
pressing the SUB-TOTAL key.
#
Note: After switching to the Programme menu, turning the key switch to REG and switching on the cash register
again, each clerk must log on from this moment.
5.6.3 Logging on to the cash register as a clerk
Input Display
Log In Failed!!
No Authority
Please Continue...
In all key
switch
positions
Clerk/Supervisor ID:
● Enter the clerk number.
● Confirm by pressing the
CLERK key.
$*
If a password has been
programmed, you are now
requested to enter it.
#
Password:
● Enter the clerk password.
● Confirm by pressing CASH.
$$$#
#
$$$#
#
3#