Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 30 Specifications subject to change without notice!
5.8 =Programming a surcharge as an amount
This function programs a fixed amount for the surcharge.
Note: When the cash register is in its default setting, the key for the fixed amount surcharge is not set up on the
keyboard. The way in which to program the keyboard is described in Chapter 5.20.
Example: A fixed surcharge of € 6.- must be programmed.
Input Display
=KEY +/- 0 1=
● Set the key to PRG
● Select programme number 09
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
#
[ 0.00] ADD ON+
[ 0.00] DISCOUNT-
● Use the  and  keys to
move to the input area
[ ] ADD ON+.
#
● Use the digit keys to enter the
amount of the surcharge (with
decimal point and decimal
places).
● Confirm by pressing CASH.
#
#
3#
[ 6.00] ADD ON+
● Conclude programming by
pressing the SUB-TOTAL key.
2#
5.9 Programming a discount as an amount
This function programs a fixed amount for the discount.
Note: When the cash register is in its default setting, the key for the fixed amount discount is not set up on the
keyboard. The way in which to program the keyboard is described in Chapter 5.20.
Example: A fixed discount of € 1.- must be programmed.
Input Display
=KEY +/- 0 1=
● Set the key to PRG
● Select programme number 09
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
#
[ 0.00] ADD ON+
[ 0.00] DISCOUNT-
● Use the  and  keys to
move to the input area
[ ] DISCOUNT-.
#
● Use the digit keys to enter the
amount of the discount (with
decimal point and decimal
places).
● Confirm by pressing CASH.
#
#
3#
[ 1.00] DISCOUNT-
● Conclude programming by
pressing the SUB-TOTAL key.
2#