Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 31 Specifications subject to change without notice!
5.10 Programming a surcharge as a percentage
This function programs a surcharge as a percentage value.
Note: When the cash register is in its default setting, the key for the percentage surcharge is not set up on the
keyboard. The way in which to program the keyboard is described in Chapter 5.20.
Example: A percentage value of 10% must be programmed for the surcharge.
Input Display
=Key +/- 1=
● Set the key to PRG
● Select programme number 10
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
#
[ 0.00] ADD ON%
[ 0.00] DISCOUNT%
● Use the  and  keys to
move to the input area
[ ] ADD ON%.
#
● Use the digit keys to enter the
percentage value for the
surcharge (with decimal point
and decimal places, value
between 0.01 and 99.99).
● Confirm by pressing CASH.
#
#
3#
[ 2.00] ADD ON%
● Conclude programming by
pressing the SUB-TOTAL key.
2#
5.11 Programming a discount as a percentage (-%)
This function programs a discount as a percentage value.
Example: A percentage value of 5% must be programmed for the discount.
Input Display
=Key +/- 1=
● Set the key to PRG
● Select programme number 10
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
3
#
[ 0.00] ADD ON%
[ 0.00] DISCOUNT%
● Use the  and  keys to
move to the input area
[ ] DISCOUNT%.
#
● Use the digit keys to enter the
percentage value for the
discount (with decimal point
and decimal places, value
between 0.01 and 99.99).
● Confirm by pressing CASH.
#
#
3#
[ 5.00] DISCOUNT%
● Conclude programming by
pressing the SUB-TOTAL key.
2#