Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 38 Specifications subject to change without notice!
5.15 Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note: If you want to work with a second foreign currency, you must programme FC 2 on the keyboard (refer to
Chapters 5.20 and 5.20.2). The default FC key on the keyboard only applies for foreign currency 1!
Clarify the following before starting with the actual programming operation:
● Which foreign currency should be programmed?
● In which momory location should this foreign currency be programmed?
● What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
● What is the exchange rate (foreign currency to local currency)?
Example: US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (local currency = 1 EUR, foreign currency = 1.35 USD).
Input Display
=FC 1- 1=
● Set the key to PRG
● Select programme number 16
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
The first foreign currency memory
location appears in the display.
3
#
[FC01 ]
Foreign: 0.01
Native: 0.01
FC 2- 1=
● Press the CASH key to
change the foreign currency
memory location.
3#
● Use the  and  keys to
move to the text input area
[FC0x ].
#
[FC02 ]
● Confirm by pressing CASH.
3#
FC02
● Delete the existing text.
#
● Enter the new foreign currency
text (refer to Chapter 5.2).
2x
 then 3
#
U
4x
 then 3
#
US
1x
 then 3
#
USD
● Conclude text input by pressing
the CASH key.
3#
[USD ]
● Use the  and  keys to
move to the input area
Foreign:.
#
Foreign: 0
● Enter the foreign currency.

#
Foreign: 1.35
● Confirm by pressing CASH.
3#
Foreign: 1.35
- Continued on next page -