Operation Manual
Cash Register CM 910 / 911 / 912
Olympia
2011 Page 40 Specifications subject to change without notice!
5.17 Programming logo messages
The logo message, printed at the top of the receipt, can contain up to 4 lines and a maximum of 32 characters per line.
Four logo lines are already pre-programmed.
Note: If you do not want to print a logo message, you can delete the pre-programmed logo message lines.
Note: Refer to Chapter 5.2 for information on entering text.
Note: Text lines which are not programmed are not printed.
Example: A logo should be programmed containing the text "********* WELCOME *********". The remaining pre-
programmed lines should be deleted.
Input Display
=LOGO MESSAGE - 1=
********************************
YOUR RECEIPT
********************************
● Set the key to PRG
● Select programme number 31
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
The programmed logo message
appears in the display. The first
logo line is already selected.
3
#
● Press the CASH key to
programme text for the first
line.
Note: Only 20 characters can
appear as a line in the display at
one time but 32 characters are
possible on the receipt.
3#
********************
* * * * * * * * * * * *
● Delete the existing logo
message text by pressing the
CLR key.
#
● Enter the new logo message.
Procedure
refer to Chapter 5.2
********* WELCOME *********
● Save the text by pressing
CASH.
3#
********* WELCOME *********
● Use the and keys to
access the next logo line.
● Continue programming the text
as described.
#
#
etc.
● Conclude programming by
pressing the SUB-TOTAL key.
2#