Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 45 Specifications subject to change without notice!
6 Operation
The cash register must be operated when set to Registration mode, REG.
Note: The information below applies for the following subchapters: the cash register is always programmed to 2
decimal places (default setting).
Display
● Set the key to REG
19-01-2011 17:30:30
0.00
6.1 Clearing error messages
In the case of input errors or exceeding limit values, the cash register issues an error status: An acoustic signal is issued
and an "E" (Error) appears in the display. Press the CLR key to clear the error message.