Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 64 Specifications subject to change without notice!
10 Deleting Cash Register Data
This function is used to deleted data stored in the cash register. This includes the report memory, electronic journal or
cash register programme, for example.
Note: Pay attention to the obligations in respect of providing proof and preserving records for the revenue
authorities before starting any deleting functions! Deleted data cannot be restored!
Input Display
= MEMORYCLEAR - 1 =
Set the key to PRG
Select programme number 80
(refer to Chapter 5.1.2).
Confirm by pressing CASH
The information which can be
deleted appears in the display.
Use the  and  keys to
move to the data to be deleted.
Confirm by pressing CASH.
3
#
#
##
3#
PROGRAM AREA
CASHIERS AREA
DEPARTMENT AREA
PLU AREA
E-JOURNAL AREA
ALL REPORT AREA
ALL AREA
Confirm the prompt by pressing
the CASH key.
3#
Conclude programming by
pressing the SUB-TOTAL key.
2#
11 In the Case of Problems
Attention: The power socket must be close to the cash register and easily accessible. This means that the cash register
can be disconnected from the power supply quickly in an emergency.
11.1 Display messages
Display Cause Corrective measures:
Paper
End of paper roll. Replace a new paper roll.
L
The battery capacity is too low. Charge the battery.
B
Receipt printing is switched off.
Press the Receipt ON/OFF key to switch receipt printing on
again.
T
The cash register is in Training
mode;
Press the Training key to deactivate Training mode.
II
Department level 2 is active
Press the DP SHIFT key to switch between the department
levels.
III
Department level 3 is active
Press the DP SHIFT key to switch between the department
levels.