Operation Manual

Cash Register CM 910 / 911 / 912
Olympia
2011 Page 66 Specifications subject to change without notice!
Note: During transfer, PLEASE WAIT appears in the display.
Never interrupt this process!
12.2 Bar code scanners
A bar code scanner can be used to read 8 and 13-character EAN codes.
12.3 Suitable bar code scanners with a PS-2 plug
The following bar code scanners with PS-2 connection have been tested by Olympia and can be implemented without any
problems:
● Olympia:
● Model LS-6000 (part number 947990001)
● METROLOGIC:
● Model ECLIPSE
● Model ORBIT
● Model VOYAGER
PS 2 plug on the scanners
12.3.1 Setting up a bar code scanner
The scanner models tested by Olympia can be connected directly to the PS-2 socket on the cash register and used.
12.3.2 Using the barcode reader to programme PLUs in the cash register
Input Display
PLU - item 1 =
● Set the key to PRG
● Select programme number 03
(refer to Chapter 5.1.2).
● Confirm by pressing CASH.
The memory location for the first
PLU is automatically activated.
3
#
● Read the bar code using the bar code scanner.
● Complete the other PLU assignments (refer to Chapter 5.5) and confirm each entry by pressing the
CASH button.
● When the next PLU storage location appears in the cash register display, scan the next PLU and
proceed in the same way for the next PLUs.
Conclude programming by pressing the SUB-TOTAL key.