Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 101 Specifications subject to change without notice!
6.28.2 Programming the keys
Example: The "Training" function (code number 34) should be assigned to the key currently assigned the "Print Size"
function (code number 64).
Input Display
=KEY-FUNCTION 1=
1. Set the key to PRG.
2. Select programme number 45
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
=KEY-PLU 1=
#
[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
If you want to programme a PLU key:
4. Press the ┣CASH┫ key again.
Note: Press the ┣CASH┫ key to
toggle between the
programming of function
and PLU keys.

5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] VALUE CODE
input area.

[ 0] VALUE CODE
6. Use the digit keys to enter the
code number of the required
function, e.g. 34 (Training).

[ 34] VALUE CODE
7. Press the ┣CASH┫ key to confirm
the input.
The display switches to the next input
area, [ ] KEY BE ASSIGNED.
#
[ 0] KEY BE ASSIGNED
8. Press the ┣CASH┫ key.
#
Pls Input
Redefine Key
9. Now press the key to be as-
signed the new function. The
display shows:

Save...!!
Please Continue...
The [ ] KEY BE ASSIGNED field
displays the internal key code to
which the function has been assigned.

[ 34] VALUE CODE
[391] KEY BE ASSIGNED
10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"
Note: Please create a suitable key label for the reprogrammed key so that other clerks clearly know what function
is assigned to the key!