Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 105 Specifications subject to change without notice!
6.29 Programming Dallas keys
Dallas keys are so called unicums which operate using a 12-character code. There is only one copy of each Dallas key. In
this way, Dallas keys simultaneously offer a great deal of security and ease of operation.
Note: To install the Dallas lock, see Chapter 14.6.
Example: A Dallas key should be programmed for clerk no. 2.
Input Display
DALLAS KEY 1- 1
1. Set the key to PRG.
2. Select programme number 46
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to con-
firm the selection.
#

[ 1] CLERK NO.
DALLASCODE:
[FFFFFFFFFFFF ]
DALLAS KEY 2- 1
4. Press the ┣CASH┫ key to move
to the Dallas key memory
location (1 to 16).
#
[ 2] CLERK NO.
DALLASCODE:
[FFFFFFFFFFFF ]
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [FFFFFFFFFFFF]
input area.

[FFFFFFFFFFFF ]
6. Hold the Dallas key on the
Dallas lock.

7. Press the ┣CASH┫ key to
confirm the input.
The 12-character code is read in
(e.g.: A1B2C3D4E5F6).
#
[A1B2C3D4E5F6 ]
8. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
"