Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 113 Specifications subject to change without notice!
6.33 Programming the date format
You can define how the date should be printed:
Date format Code
Month / Day / Year (MM / DD / YYYY) 0
Day / Month / Year (DD /MM / YYYY) 1
Year / Month / Day (YYYY / MM / DD) 2
Note: The date is set to Month / Day / Year in its default state.
Note: For programming the date format, see Chapter 6.16.
Example: The date should be printed in the format Year / Month / Day.
Input Display
=DATE FORMAT - 1=
1. Set the key to PRG.
2. Select programme number 52
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to
confirm the selection.
#

[0]
4. Enter the code for the date
format using the numeric
keys.

[2 ]
5. Press the ┣CASH┫ key to
confirm the input.
#
Save...!!
Please Continue...
6. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
"