Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 115 Specifications subject to change without notice!
7 Operation
The cash register must be set to Registration mode, REG, in order to operate it.
Display
Set the key to REG
17-06-2011
0.00
Note:
The following applies for the following subsections:
● the cash register is always programmed to 2 decimal places (default setting) and
● the input examples normally depict keys on a raised keyboard (for corresponding keys on the flat keyboard, see
Chapter 4.3).
7.1 Clearing error messages
In the case of input errors or exceeding limit values, the cash register indicates an error status: An acoustic signal is
issued and an "E" (Error) appears in the display. Press the ┣CLR┫ key to clear the error message.