Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 116 Specifications subject to change without notice!
7.2 Registering departments
Note: Do not enter a decimal point when entering a price; the cash register automatically enters the decimal point
according to the setting defined (refer to Chapter 6.31).
Note: If you have programmed two fixed prices for departments (see Chapter 6.4) which you also want to register,
you must program the two keys ┣PRICE1┫ and ┣PRICE 2┫ on the keyboard (see Chapter 4.3.2 and 6.28)!
Subsequently, press the ┣PRICE 1┫ or ┣PRICE 2┫ key before registering the item in order to define which fixed
price you want to register.
Important: This assignment remains for the duration of a registration process until you press the ┣PRICE 1┫
and ┣PRICE 2┫ keys to indicate a new assignment!
7.2.1 Registering a DP once using fixed price 1
Important information
● A fixed price must have been programmed for price 1 (refer to Chapter 6.4).
● If two fixed prices have been programmed (refer to Chapter 6.4), the cash register always operates with fixed price 1.
● If you press the ┣PRICE 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until
you press the ┣PRICE 1┫ key to reactivate fixed price 1.
● After concluding a registration process, price 1 is automatically reactivated!
7.2.1.1 Items were previously registered using price 1
Example: Department 1 should be registered with price 1.
Input
1. Set the key to REG
2. Press the relevant department key.
$
7.2.1.2 Items were previously registered using price 2
Example: Department 1 should be registered with price 1.
Input
1. Set the key to REG
2. Press the ┣PRICE 1┫ key.
3. Press the relevant department key.
┣PRICE 1┫
$"