Operation Manual
Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 117 Specifications subject to change without notice!
7.2.2 Registering a DP once using fixed price 2
● A fixed price must have been programmed for price 2 (refer to Chapter 6.4).
● If two fixed prices have been programmed (refer to Chapter 6.4), the cash register operates with fixed price 1 by
default.
● If you press the ┣PRICE 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until
you press the ┣PRICE 1┫ key to reactivate fixed price 1.
● After concluding a registration process, price 1 is automatically reactivated!
7.2.2.1 Items were previously registered using price 2
Example: Department 1 should be registered with price 2.
Input
1. Set the key to REG
2. Press the relevant department key.
$
7.2.2.2 Items were previously registered using price 1
Example: Department 1 should be registered with price 2.
Input
1. Set the key to REG
2. Press the ┣PRICE 2┫ key.
3. Press the relevant department key.
┣PRICE 2┫
$"
7.2.3 Registering a DP once without a fixed price
Example: 100.50 EUR should be registered to Department 1.
Input
1. Set the key to REG
2. Enter the price (without decimal point, with
decimal places).
3. Press the relevant department key.
$
7.2.4 Multiple DP registration
Example: 15 pieces of an item at a price of EUR 5.75 should be registered for Department 2.
Input
1. Set the key to REG
2. Enter the quantity.
3. Press the multiplication key ┣ X ┫.
4. Enter the price (without decimal point, with
decimal places).
5. Press the relevant department key.
%
Note: The quantity of goods can a value between 1 and 9999.