Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 120 Specifications subject to change without notice!
7.3 Registering PLUs
Items (PLUs) are registered by means of PLU numbers.
Note: The cash register can be used to process EAN-8 and EAN-13 bar codes.
Note: If an attempt is made to register a PLU which has not been programmed, the following message appears:
NO RECORD, CONTINUE.
Note: If you have programmed two fixed prices for PLUs (refer to Chapter 6.5), which you also want to register, you
must program the two keys ┣PRICE 1┫ and ┣PRICE 2┫ on the keyboard (refer to Chapters 4.3.2 and 6.28)!
Subsequently, press the ┣PRICE 1┫ or ┣PRICE 2┫ key before registering the item in order to define which fixed
price you want to register.
Important: This assignment remains for the duration of a registration process until you press the ┣PRICE 1┫
and ┣PRICE 2┫ key to indicate a new assignment!
7.3.1 Registering a PLU once using fixed price 1
Important information
● A fixed price must have been programmed for price 1 (refer to Chapter 6.5).
● If two fixed prices have been programmed (refer to Chapter 6.5), the cash register operates with fixed price 1 by
default.
● If you press the ┣PRICE 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until
you press the ┣PRICE 1┫ key to reactivate fixed price 1.
● After concluding a registration process, price 1 is automatically reactivated!
7.3.1.1 Items were previously registered using price 1
Example: PLU 3 should be registered with price 1.
Input
1. Set the key to REG
2. Enter the PLU number.
3. Press the ┣PLU┫ key.

7.3.1.2 Items were previously registered using price 2
Example: PLU 3 should be registered with price 1.
Input
1. Set the key to REG
2. Press the ┣PRICE 1┫ key.
3. Enter the PLU number.
4. Press the ┣PLU┫ key.
┣PRICE 1┫
