Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 134 Specifications subject to change without notice!
8 Restaurant Functions (Table System)
If the restaurant version of the cash register is operated (see Chapter 6.30), special functions are available, such as the
table function, for example.
The table system serves to record individual registrations for each table. A table can be opened and closed at any time. In
the period between, departments and PLUs can be registered to a table and corrected, if necessary. The final receipt is
printed out after the table has been paid.
Note: All the procedures described in the previous chapters are identical when operating the table system. The
only difference is that the first step is always to open the table and the final transaction to close the table.
8.1 Opening a table
Note: A maximum of 70 tables can be opened.
1. Set the key to REG.
Input Display
2. Enter the table number.
3. Press the ┣TABLE┫ key.
 
table: 1
Register items in the normal way (refer to Chapter 7).
8.2 Closing a table
1. Set the key to REG.
Input Display
2. Press the ┣TABLE┫ key.
 
17-06-2011
0.00
8.3 Registering items for a table
Receipt
1. Set the key to REG.
2. Open the table (see Chapter 8.1).
3. Register the items (see Chapter 7).
4. Close the table again (see Chapter 8.2).
TABLE 1
No.1
1x 1 10.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TABLE 1
No.2
1x 2 100.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -