Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 139 Specifications subject to change without notice!
8.8 Error corrections/Voids within the table system
Proceed as described in Chapter 7.9.2 to correct/cancel PLU registrations within the scope of the table system.
Example: Three items were registered within the scope of the table system: PLUs 1 to 3 at fixed price 1. PLU 2 should
be cancelled (void).
Input Display Receipt
1. Set the key to REG.
2. Enter the table number.
3. Press the ┣TABLE┫ key.
4. Press the ┣VOID┫ key.
3. 3
1 50,00
5. Use the ┣↑┫ and ┣↓┫ keys
to move to the item to be
cancelled.
2. 2
1 100.00
6. Press the ┣EC┫ to clear the
item selected.
2. 2
0 0.00
7. Press the ┣CASH┫ key to
return to the registration.
Cancel
2 -100,00
8. Press the ┣TABLE┫ key to
exit from the table system.
The cash register prints a slip
for the correction.
TABLE1
Cancel
-1x 2 -100.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8.9 Order type system
The order type system organises the printout of orders on the cash register. Order type names ensure that PLUs with the
same order number are printed on the same receipt. These order receipts are then printed out in succession. The order
type system is activated by the fact that the PLU was assigned an order type name during PLU programming (also refer
to Chapter 6.5.1.8).