Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 152 Specifications subject to change without notice!
14.2 USB flash card slot for data backup
Use an USB flash card to make a backup copy of the current programme data and all reports. If the cash register
develops a technical defect or data is lost, you can load the backup copies of the reports and programme back on the
cash register from the USB flash card.
Note: The electronic journal (EJ) is saved on the USB flash card.
Note: The USB flash card must be plugged in at the rear of the device.
14.2.1 Saving data on a USB flash card
Input
Display
USB STICK - 1=
1. Plug a USB flash card in the
slot on the rear of the device.
2. Set the key to PRG
3. Select programme number 82
(see Chapter 6.1.2).
4. Press the ┣CASH┫ key to
confirm the selection.
The options appear in the display.
#

USB STICK BACKUP
USB STICK RECOVERY
5. Use the ┣↑┫ and ┣↓┫ keys to
select USB STICK BACKUP.
6. Press the ┣CASH┫ key to
confirm the selection.


#
>>>>>>>>>>>>>>>>>>>>>>>>
Save...!!
Please Continue...
The current programme and reports (including the electronic journal) are transferred from the cash register and stored on
the USB flash card.
Note: The transfer process is indicated in the display during data transfer.
Never interrupt this process! Then disconnect the cash register briefly from the mains power supply.
Note: The electronic journal (EJ) is saved on the USB flash card.
14.2.2 Loading data from the USB flash card
Input Display
USB STICK - 1=
1. Plug the USB flash card con-
taining the cash register data in
the slot on the rear of the
device.
2. Set the key to PRG
3. Select programme number 82
(see Chapter 6.1.2).
4. Press the ┣CASH┫ key to
confirm the selection.
The options appear in the display.
#

USB STICK BACKUP
USB STICK RECOVERY
5. Use the ┣↑┫ and ┣↓┫ keys to se-
lect USB STICK RECOVERY.
6. Press the ┣CASH┫ key to con-
firm the selection.


#
>>>>>>>>>>>>>>>>>>>>>>>>
Save...!!
Please Continue...
All the data stored (programme and reports) is transferred from the USB flash card to the cash register.
Note: The transfer process is indicated in the display during data transfer.
Never interrupt this process! Then disconnect the cash register briefly from the mains power supply.