Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 153 Specifications subject to change without notice!
14.3 Bar code scanners
A bar code scanner can be used to read 8 and 13-character EAN codes.
14.3.1 Suitable bar code scanners with a PS/2 plug
The following bar code scanners with PS/2 connection have been tested by Olympia and can be implemented without any
problems:
Olympia:
● Model LS-6000 (part number 947990001)
METROLOGIC:
● Model ECLIPSE
● Model ORBIT
● Model VOYAGER
14.3.2 Setting up a bar code scanner
The scanner models tested by Olympia can be connected directly to the PS-2 socket on the cash register and used.
14.3.3 Using the barcode reader to programme PLUs in the cash register
Input Display
PLU - Item 1 =
1. Set the key to PRG
2. Select programme number 03
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to
confirm the selection.
The memory location for the first
PLU is automatically activated.
#

4. Read the bar code using the bar code scanner.
5. Complete further PLU assignments (see Chapter 6.5) and confirm each entry by pressing the ┣CASH┫
key.
6. When the next PLU memory location appears in the cash register display, scan the next PLU and
proceed in the same way for the next PLUs.
7. Conclude the programming process by pressing the ┣SUB-TOTAL┫ key.
PS/2 plug on the scanners
Fig. 36