Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 33 Specifications subject to change without notice!
- Continued -
Displayanzeige - German
Display content
in English
Significance
46.DALLAS SCHLÜSSEL 46.DALLAS KEYS Programme Dallas keys
47.ECR FUNKTIONS-TYP 47.ECR TYPE Set cash register type
48.DEZIMAL PUNKT 48.DECIMAL POINT Set number of decimal places
49.SPRACHE 49.LANGUAGE Set language
50.RUNDUNG PO-RA% 50.ROUNDING PO-RA% Programme rounding method
51.RUNDUNG STEUER 51.ROUND TAX Programme tax rounding method
52.DATUMS FOMAT 52.DATE FORMAT Programme date format
53.RUNDUNG BETRAG 53.ROUNDING AMOUNT Programme amount rounding
80.SPEICHER LÖSCHEN 80.MEMORY CLEAR Delete all data from memory
81.SD CARD 81.SD CARD BACKUP Produce data backup
82.USB STICK 82.USB STICK BACKUP Send and receive data via USB flash card
Note: The sequence of subsequent chapters on programming (from Chapter 6.4) basically corresponds to the
order in the above programming menu.
6.1.2 Initiate programming
Proceed as follows to programme one of the menu options:
1. Set the key to PRG
2. Select the menu option you want to program:
● Use the ┣↑┫ and ┣↓┫ keys to scroll to the required item in the menu.
Or:
● Enter the programme number using the digit keys.
3. Press the ┣CASH┫key to confirm selection.
6.1.3 Conclude programming
Press the ┣SUB-TOTAL┫ key to end programming and skip one menu level back.