Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 55 Specifications subject to change without notice!
6.6.2 Programming LINK PLUs
1. Set the key to PRG
2. Select programme number 04 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm the selection.
The first PLU programmed is always displayed.
Entering the LINK PLU number:
4. Use the ┣↑┫ and ┣↓┫ keys to move to the input area for the LINK PLU number.
5. Use the digit keys to define which LINK PLU is to be programmed.
6. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Programming the LINK PLU name:
7. Use the ┣↑┫ and ┣↓┫ keys to move to the input area for the LINK PLU name.
8. Press the ┣CASH┫ key to confirm the selection.
9. Enter the required text (max. 18 characters) (see Chapter 6.2).
Save each letter after entry by pressing the ┣CASH┫ key!
10. Press the ┣CASH┫ key to confirm the input.
Programming LINK PLU fixed price 1:
11. Use the ┣↑┫ and ┣↓┫ keys to move to the input area for LINK PLU fixed price 1.
12. Enter the fixed price 1 (including decimal place and decimal point).
13. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Programming LINK PLU fixed price -2:
14. Enter the fixed price 2 (including decimal place and decimal point).
15. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Assigning a tax rate:
16. Enter the tax rate group.
17. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Assigning a department:
18. Enter the department number as a 2-digit number.
19. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Programming the LINK PLU status:
20. Enter the LINK PLU status number.
21. Press the ┣CASH┫ key to confirm the input.
The system is now at the beginning of the programmed LINK PLU.
22. After all the PLUs have been programmed and saved, conclude programming by pressing the ┣CASH┫
and ┣SUB-TOTAL┫ keys in succession.