Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 61 Specifications subject to change without notice!
6.7.2 Programming clerks
Example: The name "Eva" must be programmed for clerk no. 2. Her pass code must be set to 222222. Clerk no. 2
should receive a commission of 3% of the net sales and be assigned all clerk rights except that for printing Z-
reports.
Input Display
=CLERK 1- 1=
1. Set the key to PRG
2. Select programme number 06
(refer to Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
The first clerk appears in the display.
#

[01 ]
PASS CODE
0 COMM.RATE%
0 COMM.FACTOR
00 STATUS1
00 STATUS2
00 STATUS3
SAVE...
CLERK 2- 1=
4. Use the ┣CASH┫ key to switch to
the required clerk memory loca-
tion.
#
[02 ]
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the input area for the
clerk name.
6. Press the ┣CASH┫ key to confirm
the selection.


#
7. Delete the existing text.

8. Enter the clerk name (text input,
refer to Chapter 6.2).
2x
 then #

E
6x
 then #

Ev
4x
 then #

Eva
9. Conclude text input by pressing
the ┣CASH┫ key.
#
[Eva ]
10. The cash register automatically
switches to the PASS CODE in-
put area.

PASS CODE
11. Enter the current password (de-
fault setting: 000000).
Note: Always enter the
password as a 6-digit
number!
12. Press the ┣CASH┫ key to confirm
the input.




#
****** PASS CODE
- Continued on next page -