Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 63 Specifications subject to change without notice!
- Continued -
25. Enter the 2-digit status number
3.
26. Press the ┣CASH┫ key to confirm
the input.


#
00 STATUS3
Note: When a feature is
already programmed as
required, you can skip
the programming step.
Saving and concluding clerk programming:
27. Confirm SAVE… by pressing the
┣CASH┫ key.
#
Save...!!
Please Continue...
28. Continue programming for other
clerks or conclude the clerk pro-
gramming process by pressing
the ┣SUB-TOTAL┫ key.
"
6.7.3 Activating/Deactivating the clerk system
The clerk system is activated/deactivated using system option 3 (status code 2) (see Chapter 6.15).
Input Display
=P REGISTER 1- 1=
1. Set the key to PRG
2. Select programme number 13
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[32] STATUS NO.Mx-My
4. Use the digit keys to enter ┣ 3 ┫.

=P REGISTER 3- 1=
5. Use the ┣↑┫ and ┣↓┫ keys to
access the input area.

[47] STATUS NO.Mx-My
6. Enter the status code ┣43┫ to acti-
vate the clerk system (while re-
taining the other features in their
default setting).
Or:
7. Enter the status code ┣47┫ to de-
activate the clerk system.

[43] STATUS NO.Mx-My
or
[47] STATUS NO.Mx-My
8. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
9. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"
Note: When the cash register is switched on the next time, each clerk must log on to the cash register immediately.