Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 64 Specifications subject to change without notice!
6.7.4 Logging on to the cash register as a clerk
Example: Clerk no. 2 (clerk name = Eva, clerk number = 2, clerk pass code = 222222) logs on to the cash register.
Input Display

Log In Failed!!
No Authority
Please Continue...
In all key
switch
positions

CLERK NO.
1. Enter the clerk number (1, 2, 3,
… or 16).
2. Press the ┣CLERK┫ or ┣CASH┫ key
to confirm the entry.

#
If a pass code has been programmed,
you are now requested to enter it.

Password:
3. Enter the 6-digit clerk pass code.
4. Press the ┣CASH┫ key to confirm
the input.
Note: When Registration mode
is active, the
programmed clerk name
appears in the display for
a brief moment.



#
Eva
Note: System option 4 (status code 2) can be used to define whether a clerk must log on to the cash register again
each time after concluding a transaction. The default setting of the cash register is such that a clerk remains
logged on to the cash register until the key switch is set to OFF.