Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 66 Specifications subject to change without notice!
6.8 Programming tender media identification
The tender media defines the method of payment for a purchase. There are five different tender media.
The two most common tender media are already provided as keys on the keyboard:
● ┣CASH┫
● ┣CARD┫
The following tender media can also be set up on the keyboard:
● ┣CHEQUE┫
● ┣CREDIT 1┫
● ┣CREDIT 2┫
The names of the tender media are used on the receipts and cash register reports and can be reprogrammed, if
necessary:
Example: Tender medium 4 "CREDIT 2“ should be renamed "XYZ".
Input Display
=TENDER MEDIA 1- 1=
1. Set the key to PRG.
2. Select programme number 08
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[CASH ]
[ 00] STATUS

=TENDER MEDIA 4- 1=
4. Select the tender medium re-
quired: Switch between the vari-
ous tender media by pressing
the ┣CASH┫ key.
4x
#
[CREDIT 2 ]
5. Use the ┣↑┫ and ┣↓┫ keys to
access the input area.

[CREDIT 2 ]
6. Press the ┣CASH┫ key to confirm
the selection.
#
CREDIT 2
7. Delete the existing text.

8. Enter the new tender name (text
input, refer to Chapter 6.2).
2x
 then #

X
3x
 then #

XY
4x
 then #
XYZ
9. Conclude text input by pressing
the ┣CASH┫ key.
#
[XYZ ]
Note: The STATUS field is
reserved by the software
and cannot/must not be
reprogrammed!

10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"