Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 70 Specifications subject to change without notice!
6.11 Programming a percentage surcharge (%+)
This function programs a surcharge as a percentage value.
Example: A percentage value of 10% must be programmed for the surcharge.
Input Display
=Key +/- 1=
1. Set the key to PRG.
2. Select programme number 10
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[ 0.00] ADD ON%
[ 0.00] DISCOUNT%
4. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] ADD ON% input
area.

[ 0.00] ADD ON%
5. Use the digit keys to enter the
percentage value for the sur-
charge (with decimal point and
decimal places, value between
0.01 and 99.99).


[ 2.00] ADD ON%
6. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
7. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"
6.11.1 Programming a percentage surcharge (+) using the PC
See Chapter 6.9.1.
6.12 Programming a percentage discount (-%)
This function programs a discount as a percentage value.
Example: A percentage value of 5% must be programmed for the discount.
Input Display
=Key +/- 1=
1. Set the key to PRG.
2. Select programme number 10
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[ 0.00] ADD ON%
[ 0.00] DISCOUNT%
4. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] DISCOUNT%
input area.

[ 0.00] DISCOUNT%
5. Use the digit keys to enter the
percentage value for the discount
(with decimal point and decimal
places, value between 0.01 and
99.99).


[ 5.00] DISCOUNT%
6. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
7. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"
6.12.1 Programming a percentage discount (%-) using the PC
See Chapter 6.9.1.