Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 74 Specifications subject to change without notice!
6.15 System options
65 different cash register features can be set using the system options. When the cash register leaves the factory, the
system options are set for normal cash register operation (digits below in bold print).
Programming of the individual features has been arranged in 14 system options. Up to 6 different features can be
programmed for each system option . Each system option is unambiguously defined by means of a 2-digit number (status
number): Both the first as well as the second status number can be assigned a value from 0 and 7. The correct 2-digit
status number can be found in Chapter "System Options in Detail".
Note: The arrangement of features in system options means that it is essential that all the features related to a system
option are programmed even if you only want to change one feature!
Note: Certain system options which are not assigned a feature are defined as "reserved" areas by the software.
6.15.1 System options in detail
Note: The default settings appear in bold print.
Note: Generally speaking, the system options need not be changed when the cash register is used normally.
System option 1: Defining the content of receipts/bills
Status code 1 Status code 2
Features: 0 1 2 3 4 5 6
7
Features: 0 1
2
3 4567
Print tax amount, total tax,
net total on receipt
X X X
X
Print free code (EAN) on
receipt
X X X X
Print net amount on receipt X X X
X
Print date on receipt
X
X X X
Print tax symbol on receipt X X X
X
Print time on receipt XXXX
System option 2: Defining the content of receipts/bills
Status code 1 Status code 2
Features: 0 1 2 3 4 5
6
7 Features: 0 1 2 3 4 5
6
7
(reserved) X X X X
Print item counter on
receipt
X X X X
Print receipt number on
receipt
X X
X
X
Print logo message on
receipt
X X
X
X
Print [SUB-TOTAL] amount
after push this key
X X
X
X Print clerk name on receipt X X
X
X