Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 78 Specifications subject to change without notice!
6.15.2 Programming system options
Tip: Before starting with programming, take your time to consider how you want to programme the individual features and
note down the 2-digit status number which needs to be entered.
Input Display
=P REGISTER 1- 1=
1. Set the key to PRG.
2. Select programme number 13
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
The first system option and its current
status appear in the display.
#

[32] STATUS NO.Mx-My
4. Enter the number of the system
option to be programmed, e.g.
13.

=P REGISTER
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] input area.

[10] STATUS NO.Mx-My
6. Enter the required 2-digit status
number, e.g. 51 (to switch off the
key tone).

[51] STATUS NO.Mx-My
7. Press the ┣CASH┫ key to confirm
the input.
#
8. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"
6.15.3 Printing the system options
Input Display
=SETTINGS-PRG -90=
1. Set the key to PRG.
2. Programme number 90 is
automatically selected
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#
90.PRINT PROG DUMP
=PRINT PRG DUMP – 1=
The display shows what can be
printed.

DEPARTMENT
PLU
LINK PLU
CLERK
TENDER MEDIA
…
=PRINT PRG DUMP – 10=
4. Use the ┣↑┫ and ┣↓┫ keys to
select P-REGISTER.

P REGISTER
5. Press the ┣CASH┫ key to confirm
the selection.
#