Operation Manual
Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 81 Specifications subject to change without notice!
6.17 Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note: If you want to operate with the second foreign currency, you must programme the ┣FC 2┫ key on the
keyboard(see Chapter 6.28). The ┣FC┫ key set-up on the keyboard at the factory only applies to foreign
currency 1!
Clarify the following before starting with the actual programming operation:
● Which foreign currency should be programmed?
● In which storage location should this foreign currency be programmed?
● What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
● What is the exchange rate (foreign currency to local currency)?
Example: US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (native (local) currency = 1 EUR, foreign currency = 1.35
USD).
Input Display
FC 1- 1=
1. Set the key to PRG.
2. Select programme number 16
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
The first foreign currency memory
location appears in the display.
#
[FC01 ]
Native: 0,01
Foreign: 0,01
FC 2- 1=
4. Use the ┣CASH┫ key to switch to
the foreign currency memory
location.
#
[FC01 ]
Native: 0,01
Foreign: 0,01
5. Use the ┣↑┫ and ┣↓┫ keys to
switch to the text input area
[FC-0x ].
[FC02 ]
6. Press the ┣CASH┫ key to confirm
the input.
#
FC02
7. Delete the existing text.
8. Enter the new foreign currency
text
(see Chapter 6.2).
2x
then #
U
4x
then #
US
1x
then #
USD
9. Conclude text input by pressing
the ┣CASH┫ key.
#
[USD ]
10. Use the ┣↑┫ and ┣↓┫ keys to
move to the Foreign input area.
Foreign: 0.01
11. Enter the foreign currency.
Foreign: 1.35
12. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
- Continued on next page -