Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 87 Specifications subject to change without notice!
6.20.2 Programming the RS 232 port
Example: The RS 232 port is set-up for the connection of the Olympia/SERD TH 200 kitchen printer with a baud rate of
19,200 baud, for a data length of 7 bit, no parity and with 2 stop bits: status number 1 = 2, status number 2 =
20, status number 3 = 01.
Input Display
COM PORT 1- 1=
1. Set the key to PRG.
2. Select programme number 23
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

COM-PORTA RS232
[0 ] CONNECTION
[11] BAUDR-DATALEN
[00] PARITY-STOPB
Note: Press the ┣CASH┫ key to switch between 5 different ports.
Only the RS 232 port, assigned to the first slot, can be
programmed.
4. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] CONNECTION
input area.

[ 0 ] CONNECTION
5. Use the numeric keyboard to
enter the 1-digit status number,
e.g. 2.

[ 2 ] CONNECTION
6. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
7. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] BAUDR-
DATALEN input area.

[ 11 ] BAUDR-DATALEN
8. Use the numeric keyboard to
enter the 2-digit status number 2,
e.g. 20.

[ 20 ] BAUDR-DATALEN
9. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
10. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] PARITIY-STOPB
input area.

[ 00] PARITY-STOPB
11. Use the numeric keyboard to
enter the 2-digit status number 3,
e.g. 01.

[ 01 ] PARITY-STOPB
12. Press the ┣CASH┫ key to confirm
the input.
#
Save...!!
Please Continue...
13. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
"