Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 88 Specifications subject to change without notice!
6.21 Programming tax rates
A maximum of 8 tax rates can be programmed.
Note: The VAT tax rates 1 and 2 are preprogrammed at the factory to 19% and 7%, respectively.
Tip: Leave one tax rate without a tax assigned. This serves for neutral sales, e.g for cigarettes when a clerk
purchases a pack from a machine as a service for a guest.
Example: 19.6% should be programmed for tax rate 3.
Input Display
TAX GROUP 1- 1=
1. Set the key to PRG.
2. Select programme number 30
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to con-
firm the selection.
#

19.00 RATE%
TAX GROUP 3- 1=
4. Change the tax rate memory
location: Press the ┣CASH┫ key
until the required memory loca-
tion is displayed in the logo
message line.
2x
#
00.00 RATE%
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the RATE% input
area.

0.00 RATE%
6. Use the digit keys to enter the
tax rate (with decimal point and
decimal places).


19.60 RATE%
7. Press the ┣CASH┫ key to con-
firm the input.
#
Save...!!
Please Continue...
8. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
"
Important note: Assigning tax rates to the PLUs
The tax rate is assigned to the PLUs/departments when programming the departments. The tax totals can only be
calculated and printed on the receipt when the tax rate is actually assigned to the departments.