Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 92 Specifications subject to change without notice!
6.23 Programming AD messages
The added, AD message, printed at the bottom of the receipt, can contain up to 8 lines and a maximum of 32 characters
per line.
Three end lines are already pre-programmed.
Note:
● If you do not want to print an end message, you can delete the pre-programmed message lines.
● The way to enter texts is described in Chapter 6.2.
● Text lines which are not programmed are not printed.
● Only 20 characters of a line can be shown in the display. However, a line on the receipt may contain up to 32
characters! The display inserts a line feed in the text after 20 characters and displays the last 12 characters of the AD
message in a second line.
Note: Only 4 message lines can be programmed directly using the cash register. All 8 message lines can be
programmed using the PC programme.
Programming AD message lines is completed in the same way as for logo message lines (see Chapter 6.22). The only
difference is that program number 32 must be selected in the program menu.
Input Display
=AD MESSAGE -0 1
********************************
THANK YOU
********************************
1. Set the key to PRG.
2. Select programme number 32
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
The programmed AD message
appears in the display. The first
message line is already selected.
#

For further procedure, see Chapter 6.22.
6.23.1 Programming the AD message using the PC
The procedure for programming AD messages using the PC, see Chapter 6.22.1.