Operation Manual

Cash Register CM 940-F / 941-F / 942-F
Olympia
2011 Page 93 Specifications subject to change without notice!
6.24 Programming additional (cooking) messages
Cooking messages relate to additional information for the kitchen, e.g., how a steak should be prepared: rare, medium,
well-done etc. or whether a meal should be served with or without a side salad.
Up to 30 cooking messages can be programmed, each with a maximum of 18 characters.
Example: Cooking messages "rare", "medium" and "well done" should be assigned to memory locations 11 to 13.
Input Display
cooking msg 00 10 1
1. Set the key to PRG
2. Select programme number 40
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the selection.
#

[ ]name
cooking msg 00 10 1
4. Use the ┣CASH┫ key to change
memory locations for the cooking
message.
10x
#
[ ]name
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] Name input area.

[ ]name
6. Press the ┣CASH┫ key to confirm
the input.
#
7. Enter the cooking message.
Procedure
refer to Chapter 6.2
8. Press the ┣CASH┫ key to confirm
the input.
#
cooking msg 00 20 1
9. Use the ┣CASH┫ key to change
memory locations for the next
cooking message.
#
[ ]name
10. Repeat steps 5 to 9 until you
have programmed all the cooking
messages required.

11. End programming by pressing
the ┣SUB-TOTAL┫ key.
"