Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 101 All Rights Reserved!
6.26 Programming logo messages
The logo message, printed at the top of the receipt, can contain up to 8 lines and a maximum of 48 characters per line.
A maximum of 8 logo lines can be programmed.
Eight logo lines are already pre-programmed.
Note:
• If you do not want to print a logo message, you can delete the preprogrammed logo message lines.
• The way to enter texts is described in Chapter 6.2.
• Text lines which are not programmed are not printed.
• A full line on the receipt contains 48 characters. However, only 40 characters of a line can be shown in the display.
This always relates to the last 40 characters! Therefore, if there are more than 40 characters programmed in a line,
the first (maximally 8) characters are successively no longer displayed.
Example: A logo should be programmed containing the text "********* WELCOME *********".
The remaining preprogrammed lines should be deleted.
Input Display
LOGO MESSAGE -1=
********************************
YOUR INVOICE
MANY THANKS
********************************
1. Set the key to PRG.
2. Select programming num-
ber 31 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
The programmed logo message
appears in the display. The first logo
line is already selected.

4. Press the ┣CASH┫ key to open
the first logo message line for
programming the text.
Note: Only 40 characters can appear
as a line in the display at one time but
48 characters are possible on the re-
ceipt.

********************
5. Delete any existing logo mes-
sage by pressing the ┣CLR┫ key.

6. Enter the new logo message.
Procedure
see Chapter 6.2
********* WELCOME ! *********
7. Press the ┣CASH┫ key to save the
input.

********* WELCOME ! *********
8. Use the ┣↑┫ and ┣↓┫ keys to
move to the next logo line.
9. Continue programming the text
as described.


etc.
10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
