Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF

Olympia

6.32 Defining graphic logos

You can print a graphical logo above the logo message on a receipt.

You can select from logos provided or design a logo of your own.

6.32.1 Programming an existing graphic logo

There are 20 logos available for selection, see Fig. 35:

Fig. 35

Input Display

GRAPHIC LOGO 1=

1. Set the key to PRG.

2. Select programming num-

ber 44 (see Chapter 6.1.2).

3. Press the ┣CASH┫ key to con-

firm the input.



[ 0] No.

4. Enter the number of the

graphic logo you want to print

in the input area [ ] No., e.g.

17.



[17] No.

5. Press the ┣CASH┫ key to con-

firm the input.



Save...!!

Please Continue...

6. Conclude programming by

pressing the ┣SUB-TOTAL┫ key.



Note: In its default factory setting, the input area contains a zero, i.e., no graphic logo is printed.

6.32.1.1 Programming an existing graphic logo using the PC

In order to programme a graphical logo using the PC programme, OLYMPIA ECR System provides the following input

mask. The way to use the mask is described in Chapter 5, in detail in Chapter 5.5.