Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 115 All Rights Reserved!
6.33.2 Programming the keys
Example: The "Training" function (code number 34) should be assigned to the key which, until now, has been assigned
the "Print size" function (code number 64).
Input Display
=KEY-FUNCTION 1=
1. Set the key to PRG.
2. Select programming num-
ber 45 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.

[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
=KEY-PLU 1=

[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
If you want to programme a PLU key:
4. Press the ┣CASH┫ key again.
Note: Press the ┣CASH┫ key to
toggle between
programming function keys
and PLU keys.

5. Use the ┣↑┫ and ┣↓┫ keys to
move to the [ ] VALUE CODE
input area.

[ 0] VALUE CODE
6. Use the numeric keys to enter
the code number of the required
function, e.g. 34 (Training).

[ 34] VALUE CODE
7. Press the ┣CASH┫ key to confirm
the input.
The cash register automatically
switches to the [ ] KEY BE
ASSIGNED input area.

[ 0] KEY BE ASSIGNED
8. Press the ┣CASH┫ key.

Pls Input
Redefine Key
9. Now press the key to be as-
signed the new function. The
display shows:

Save...!!
Please Continue...
The [ ] KEY BE ASSIGNED field
contains the internal number of the
key to which the function was as-
signed.

[ 34] VALUE CODE
[391] KEY BE ASSIGNED
10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.

Note: Please create a suitable key label for the reprogrammed key so that other clerks clearly know what function is
assigned to the key!