Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 130 All Rights Reserved!
7 Operation
The cash register must be operated when set to Registration mode, REG.
Display
Set the key to REG
17-06-2012 17:30:30
0.00
Note:
The following applies for the following subsections:
the cash register is always programmed to 2 decimal places (default setting) and
the input examples normally depict keys on a raised keyboard (for corresponding keys in the flat keyboard, refer to
Chapter 4.3).
7.1 Clearing error messages
In the case of input errors or exceeding limit values, the cash register indicates an error status: An acoustic signal is
issued and an "E" (Error) appears in the display. Press the CLR key to clear the error message.