Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF

Olympia

7.2 Registering departments

Note: Do not enter a decimal point when entering a price; the cash register automatically enters the decimal point

according to the setting defined (refer to Chapter 6.36).

Note: If you have programmed two fixed prices for departments (see Chapter 6.4) which you also want to register,

you must programme the two keys ┣Price 1┫ and ┣Price 2┫ on the keyboard (see Chapters 0 and 6.33).

Subsequently, press the ┣Price 1┫ or ┣Price 2┫ key before registering the item in order to define which fixed price

you want to register. Important: This assignment remains for the duration of a registration process until you

press the ┣Price 1┫ or ┣Price 2┫ key to indicate a new assignment.

7.2.1 Registering a DP once using fixed price 1

Important information

• A fixed price must have been programmed for price 1 (see Chapter 6.4).

• If two fixed prices have been programmed (see Chapter 6.4), the cash register always operates with fixed price 1.

• If you press the ┣Price 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until

you press the ┣Price 1┫ key to reactivate fixed price 1.

• After concluding a registration process, price 1 is automatically reactivated!

7.2.1.1 Items were previously registered using price 1

Example: Department 1 should be registered with price 1.

Input

1. Set the key to REG

2. Press the relevant department key.



7.2.1.2 Items were previously registered using price 2

Example: Department 1 should be registered with price 1.

Input

1. Set the key to REG

2. Press the ┣Price 1┫ button.

3. Press the relevant department key.

┣Price 1┫

