Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 136 All Rights Reserved!
7.3.2 Registering a PLU once using fixed price 2
Important information
• A fixed price must have been programmed for price 2 (see Chapter 6.5).
• If two fixed prices have been programmed (see Chapter 6.5), the cash register always operates with fixed price 1.
• If you press the ┣Price 2┫ key, the cash register operates using fixed price 2 for the duration of the registration until
you press the ┣Price 1┫ key to reactivate fixed price 1.
• After concluding a registration process, price 1 is automatically reactivated!
7.3.2.1 If PLUs were previously registered using fixed price 2
Example: PLU 3 should be registered with price 2.
Input
1. Set the key to REG
2. Enter the PLU number.
3. Press the ┣PLU┫ key.

7.3.2.2 If PLUs were previously registered using fixed price 1
Example: PLU 3 should be registered with price 2.
Input
1. Set the key to REG
2. Press the ┣Price 2┫ key.
3. Enter the PLU number.
4. Press the ┣PLU┫ key.
┣Price 2┫

7.3.3 Registering a PLU once without a fixed price
Note: The ┣New Price┫ key must be programmed on the keyboard (refer to Chapter 6.33).
Example: PLU 3 should be registered at a price of € 19.99.
Input
1. Set the key to REG
2. Enter the price.
3. Press the ┣New Price┫ key.
4. Enter the PLU number.
5. Press the ┣PLU┫ key.
 ┣New Price┫ 
7.3.4 Registering a PLU several times
Example: 15 pieces of an item with PLU number 3 should be registered.
Input
1. Set the key to REG
2. Enter the quantity.
3. Press the multiplication key ┣ X ┫.
4. Enter the PLU number.
5. Press the ┣PLU┫ key.

Note: The quantity of goods can be a value between 1 and 9999.