Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF

Olympia

7.3.6.3 Registering a PLU using the PLU group in the display

Another option to register a PLU is to select it from the display of a PLU group to which the PLU must have been as-

signed within the scope of programming the PLU.

Example: PLU 1 should be registered. PLU 1 is assigned to PLU group 3.

1. Press the key of the PLU group to which the relevant PLU is assigned, in this case: ┣Group 3┫.

All the PLUs assigned are listed in the display.

2. Use the ┣↑┫ and ┣↓┫ keys to select the required PLU.

3. Press the ┣#NS┫ key, the PLU is registered once. If you want to register this PLU several times,

enter the number of times required and then confirm your input by pressing the ┣#NS┫ key.

You can then register other PLUs in the same PLU group.

To exit from the PLU group, press the ┣CASH┫ key.

7.4 Combining registration methods

It is possible to register department and PLU sales on a receipt (see Chapter 7.3).