Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 151 All Rights Reserved!
8 Restaurant Functions (Table System)
If the restaurant version of the cash register is operated (see Chapter 6.35), special restaurant functions are available,
such as the table function, for example.
The table system serves to record individual registrations for each table. A table can be opened and closed at any time. In
the period between, departments and PLUs can be registered to a table and corrected, if necessary. The final receipt is
printed out after the table has been paid.
Note: All the procedures described in the previous chapters are identical when operating the table system. The only
difference is that the first step is always to open the table and the final transaction to close the table.
8.1 Opening a table
Note: A maximum of 150 tables can be opened.
1. Set the key to REG.
Input Display
2. Enter the table number.
3. Press the ┣Open Table┫
key.
1S
TABLE 1
Register items in the normal way (refer to Chapter 7).
8.2 Closing a table
1. Set the key to REG
Input Display
2. Press the ┣Open Table┫
key.
1S
17-06-2012 19:30:00
0.00
8.3 Registering items for a table
Receipt
1. Set the key to REG
2. Open the table (see Chapter 8.1).
3. Register the items (see Chapter 7).
4. Close the table again (see Chapter 8.2).
TABLE 1
No.1
1x 1 10.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TABLE 1
No.2
1x 2 100.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Note: By pressing the ┣Open Table┫ key, all the open tables can be shown in the display. If the clerk system is used,
only the open tables related to the clerk registered are displayed.