Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 67 All Rights Reserved!
6.9.2 Programming clerks
Example: The name "Eva" must be programmed for clerk no. 2. The pass code must be set to 222222. Clerk no. 2
should receive a commission of 3% of the net sales and be assigned all clerk rights except that for printing
Z-reports.
Input Display
=CLERK 1- 1=
1. Set the key to PRG.
2. Select programming number
06 (see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.
The first clerk appears in the display.

[01 ]
PASS CODE
0 COMM.RATE%
0 COMM.FACTOR
00 STATUS1
00 STATUS2
00 STATUS3
Save...!!…
CLERK 2- 1=
4. Use the ┣CASH┫ key to switch to
the required clerk memory loca-
tion.

[02 ]
5. Use the ┣↑┫ and ┣↓┫ keys to
move to the input area for the
clerk name.
6. Press the ┣CASH┫ key to confirm
the input.



7. Delete the existing text.

8. Enter the clerk name (text input,
refer to Chapter 6.2).
2x
 then 
E
6x
 then 
Ev
4x
 then 
Eva
9. Conclude text input by pressing
the ┣CASH┫ key.

[Eva ]
10. The cash register automatically
switches to the PASS CODE in-
put area.

PASS CODE
11. Enter the current pass code (de-
fault setting: 000000).
Note: Always enter the pass
code as a 6-digit number!
12. Press the ┣CASH┫ key to confirm
the input.




****** PASS CODE
- Continued on next page -