Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 69 All Rights Reserved!
- Continued -
25. Enter the two-digit status number
3.
26. Press the ┣CASH┫ key to confirm
the input.



00 STATUS3
Note: When a feature is already
programmed as required,
you can skip the
programming step.
Saving and concluding clerk programming:
27. Confirm the Save...!!… prompt
by pressing the ┣CASH┫ key.

Save...!!
Please Continue...
28. Continue programming for other
clerks or conclude the clerk pro-
gramming process by pressing
the ┣SUB-TOTAL┫ key.

6.9.3 Activating/Deactivating the clerk system
The clerk system is activated/deactivated using system option 3 (status number 2) (see Chapter 6.17).
Input Display
=P REGISTER 1- 1=
1. Set the key to PRG.
2. Select programming number 13
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm
the input.

[32] STATUS NO.Mx-My
4. Use the digit keys to enter ┣ 3 ┫.

=P REGISTER 3- 1=
5. Use the ┣↑┫ and ┣↓┫ keys to
access the input area.

[47] STATUS NO.Mx-My
6. Enter the status number ┣43┫ to ac-
tivate the clerk system (while retain-
ing the other features in their fac-
tory setting).
Or:
7. Enter the status number ┣47┫ to de-
activate the clerk system.

[43] STATUS NO.Mx-My
or
[47] STATUS NO.Mx-My
8. Press the ┣CASH┫ key to confirm the
input.

Save...!!
Please Continue...
9. Conclude programming by pressing
the ┣SUB-TOTAL┫ key.

Note: When the cash register is subsequently switched on, each clerk must log on to the cash register immediately.