Operation Manual

Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia
2012 Page 74 All Rights Reserved!
6.11 Programming an amount-related surcharge (+)
This function programmes a fixed amount for the surcharge.
Note: When the cash register is in its default factory state, the key for the fixed amount surcharge is not set-up on the
keyboard. The way in which to reprogram the keyboard is described in Chapter 6.33.
Example: A fixed surcharge of € 6.00 must be programmed.
Input Display
=Key +/- 1=
1. Set the key to PRG.
2. Select programming number 09
(see Chapter 6.1.2).
3. Press the ┣CASH┫ key to confirm the
input.

[ 0.00] ADD ON+
[ 0.00] DISCOUNT -
4. Use the ┣↑┫ and ┣↓┫ keys to move to
the [ ] ADD ON+ input area.

[ 0.00] ADD ON+
5. Use the digit keys to enter the amount
of the surcharge (with decimal point
and decimal places).

[ 6.00] ADD ON+
6. Press the ┣CASH┫ key to confirm the
input.

Save...!!
Please Continue...
7. Conclude programming by pressing
the ┣SUB-TOTAL┫ key.

6.11.1 Programming an amount-related surcharge (+) using the PC
In order to programme amount-related or percentage surcharges and discounts using the PC, OLYMPIA ECR System
provides the following input mask. It is used to programme various parameter settings. The way to use the mask is
described in Chapter 5, in detail in Chapter 5.5.
Fig. 19
Important: *** After data has been transferred, the software requires the cash register is switched off briefly! ***